Skip to main content Skip to main navigation
Skip to accessibility page Skip to search input

Searching...

How do I wear and care for the Centsitive Patch?

Instructions – Iron On

Do not iron on Patch with your PayWear Card inside.

  1. Select the accessory or item of clothing you wish to attach your Centsitive Patch to. Ensure the accessory or item of clothing is freshly cleaned and dried. The iron on method of the Patch is a more permanent solution and may not be suitable for all garments (see below for Suitable Fabrics and Care Advice).
  2. Place the Patch, pocket side up, in the desired location and cover with a thin piece of cloth. Ensure the desired location is convenient for you to reach to tap and pay with your PayWear Card, such as a hat or long sleeve.
  3. Iron and apply firm pressure over the entire area of the Patch for approximately 30-40 seconds until firmly attached.
  4. Iron the opposite side for approximately 20-30 seconds to reinforce the Patch.  Let cool for one minute. If edge of Patch can be lifted, repeat previous steps.
  5. Place your PayWear Card into the buttonhole-like entry where it will sit inside the pocket. The silicone internal lining ensures the PayWear Card stays securely and safely in place.

Now you’re good to go.

Instructions – Sew On

  1. For a more temporary application or to apply to a fabric that may not be suitable for the iron on method, we recommend hand sewing your Patch on.
  2. Using a needle and thread, sew the Patch onto the item of clothing. To avoid seeing any stitching from the exterior of the garment, sew the patch onto an item of clothing that has a fabric inner lining.
  3. Place your PayWear Card into the buttonhole-like entry where it will sit inside the pocket. The silicone internal lining ensures the PayWear Card stays securely and safely in place.

Now you’re good to go.

Suitable Fabrics

Garments made from fabrics such as leather or with low melting points, such as rainwear (waterproof), highly elastic fabrics or nylon fabrics, are not suitable for ironing on your Patch.  You are best to sew the Patch onto these items.

Care Advice

  • Always remove your PayWear Card from the Patch before washing or cleaning the accessory.
  • Cool hand wash or gentle cold machine wash is recommended.
  • After the first couple of washes, check that the edges of your Patch have remained in place.  If they have lifted, repeat steps as per desired application (iron or sew on).
  • Do not bleach or tumble dry the Patch.
  • Direct exposure to excessive heat may cause the Patch (iron on method) to detach from item and/or lose shape.